BenchMAX Label Applicator

$8,995.00 *Price Match

Embossed bottle label applicator for tapered and notched containers. Accurately place front and back labels to embossings, notches, and registration points with an orientation device.

Container diameters with 3/8″ and greater can be labeled at up to 1500 containers per hour.

This labeling machine will comfortably apply any label on any round container, tube, vial, cylinder, syringe, or bottle.

Embossed bottle label applicator for tapered and notched containers. Accurately place front and back labels to embossings, notches, and registration points with an orientation device.

Container diameters with 3/8″ and greater can be labeled at up to 1500 containers per hour.

This labeling machine will comfortably apply any label on any round container, tube, vial, cylinder, syringe, or bottle.


This fast reliable ‘On Demand’ commercial label applicator will not let you down in your most critical times. Straight out of the box you can be labeling within 4 minutes on any round container.

CONTAINERS

  • Any round/cylindrical container
  • Minimum 50mm (2 inches)
  • Minimum 8mm (3/8 inches) with Small Bottle Adaptor
  • Maximum 110mm (4 1/2 inches) Standard

LABELS

  • Single, front & back, or wrap-around labels
  • Pressure sensitive, die-cut, roll-formatted, fan folded
  • Opaque, clear, translucent

SUPPORTED LABEL SIZES

  • Thickness: Min. 0.02mm (0.002 inches)
  • Length: Greater than 25mm (1 inch)
  • Height: Min. 10mm (3/8 inches) to Max. 230mm (9 1/16 inches)
  • Direction: Left Hand Leading Edge (Internal or Externally wound)

5 Year Warranty

Trade In & Upgrade

Trouble Shooting Videos

Friendly Support Team